Each RRL Station can connect up to four Solinst dataloggers. RRL Remote Radio Link Systems are compatible with the Levelogger Edge, Barologger Edge, Levelogger Junior Edge, LTC Levelogger Edge, Rainlogger Edge, LevelVent, and AquaVent, as well as the Levelogger Gold, Barologger Gold, Levelogger Junior, LTC Levelogger Junior and Rainlogger dataloggers using the following firmware versions (or higher):
| Datalogger | Firmware Version |
|---|---|
| Levelogger Edge | 3.004 |
| Barologger Edge | 3.004 |
| Levelogger Junior Edge | 3.004 |
| LTC Levelogger Edge | 1.003 |
| Rainlogger Edge | 3.001 |
| LevelVent | 1.000 |
| AquaVent | 1.000 |
| Levelogger Gold | 2.007 |
| Barologger Gold | 2.007 |
| Levelogger Junior | 2.007 |
| LTC Levelogger Junior | 2.005 |
| Rainlogger | 2.000 |
Table 1-2 Compatible Datalogger Firmware Versions
It is also important to ensure you are using the most recent RRL firmware version, with the most recent Solinst Telemetry Software. To check this, go to https://www.solinst.com/downloads/
Note:
To determine the current firmware version on an RRL unit, connect it to the PC with a RS232 cable and open the RRL Remote Utility. See Section 5.2.
Note:
To determine what software version you are using, use the Help menu in the STS/RRL Administrator.
