Table of Contents

1.0 Introduction

• 1.1 Vented Water Level Dataloggers
  • 1.1.1 LevelVent 5
  • 1.1.2 AquaVent 5
  • 1.1.3 LevelVent
  • 1.1.4 AquaVent
• 1.2 Measurement Parameters
  • 1.2.1 Level
    • 1.2.1.1 Pressure Calibration
  • 1.2.2 Temperature
• 1.3 LevelVent System Components
  • 1.3.1 LevelVent Communication Wellhead
• 1.4 AquaVent System Components
  • 1.4.1 AquaVent Wellhead and Connector Cables
    • 1.4.1.1 SPX Wellhead LED Status
• 1.5 Vented Cable
  • 1.5.1 Vented Cable Connections
    • 1.5.1.1 Connecting to the LevelVent Wellhead
    • 1.5.1.2 Connecting to the AquaVent Wellhead
    • 1.5.1.3 Connecting to the Logger
  • 1.5.2 Vented Cable Precautions

2.0 Solinst Levelogger Software

• 2.1 System Requirements
• 2.2 Software Installation
• 2.3 Software Communication

3.0 Software Startup, Configurations and Settings

• 3.1 Startup
  • 3.1.1 Software/Firmware Update Checks
• 3.2 Configuration and Settings
  • 3.2.1 Data Directory
  • 3.2.2 File Name Settings
  • 3.2.3 Default File Type

4.0 Datalogger Programming

• 4.1 Datalogger Settings
  • 4.1.1 Setting Up Channel Information
    • 4.1.1.1 Level Channel (Ch1)
    • 4.1.1.2 Temperature Channel (Ch2)
• 4.2 Datalogger Information
• 4.3 Datalogger Memory
• 4.4 Datalogger Time
• 4.5 Datalogger Sampling Mode
• 4.6 Datalogger Memory Mode
• 4.7 Saving and Retrieving Datalogger Settings Files
• 4.8 Datalogger Zero
• 4.9 Starting and Stopping the Datalogger

5.0 Data Control

• 5.1 Downloading Options and Saving Data Files
  • 5.1.1 Default File Format
  • 5.1.2 Downloading Data
  • 5.1.3 Saving Data
• 5.2 Graph Manipulation and Zoom Function
• 5.3 File Export and Print Function

6.0 Data Compensation

• 6.1 Data Wizard

7.0 Real Time View

8.0 Vented Datalogger Installation

• 8.1 Installing the LevelVent
  • 8.1.1 Installing LevelVent in 2" Well
• 8.2 Installing the AquaVent
  • 8.2.1 Installing AquaVent Wellhead Batteries
    • 8.2.1.1 Wellhead Battery Life Estimates
  • 8.2.2 Installing AquaVent in 2" Well
• 8.3 Logger Orientation
• 8.4 Logger Installation Depth
• 8.5 Installation Precautions
• 8.6 Installation in Extreme Environments
  • 8.6.1 Freezing or High Temperature Conditions
  • 8.6.2 Marine or Brackish Installations
  • 8.6.3 Biofouling Conditions

9.0 Vented Datalogger Maintenance

• 9.1 Logger Maintenance
• 9.2 Vented Cable Maintenance
  • 9.2.1 Vented Cable Blowout Fitting
• 9.3 Wellhead Maintenance

10.0 Diagnostics Utility

• 10.1 Run Diagnostics
• 10.2 Read Memory Dump
  • 10.2.1 File Conversion (hex to xle)
• 10.3 Create Report
• 10.4 Email Report
• 10.5 Software/Firmware Updates
• 10.6 Reset AquaVent Battery Indicator
• 10.7 Clear Datalogger Zero

11.0 Firmware Upgrade Utility

12.0 Troubleshooting

• 12.1 Problems During Installation of Levelogger Software
• 12.2 Error During Software Uninstall Process
• 12.3 Data Has Been Erased Accidentally
• 12.4 Error Messages During Use of Software