e 4 Startup Configurations and Settings for Leveloggers
 

4 Startup, Configurations and Settings

4.1 Startup

If using a USB port, plug in the USB cable before starting the Levelogger Software. If plugging in the USB device for the first time, the driver for the device will have to be installed, see Section 4.1.3 for USB driver installation instructions.

To start the Levelogger Software, click , or click the Start button and select:
Programs > Solinst > Levelogger 4 > Levelogger 4.3.0

Once the program is started, you can set up the parameters for the Software.