Always plug in the USB Connector Cable before starting the Software.
Plug in the USB Connector Cable before starting the Levelogger Software.
To start the software, click , or click the Start button and select:
Programs > Solinst > Levelogger 4 > Levelogger 4.6.1
Once the program is started, you can set up the parameters for the Software.
3.1.1 Software/Firmware Update Checks
Each time the software is opened, it automatically checks on-line for software updates. If there is an update, "Software Update Available" will appear in the top right of the menu bar. When you click the message, it will open a web page where you can download the software update.
Your PC must have an internet connection to check for software and firmware updates.
The Software also checks for firmware updates once you have retrieved settings from a connected AquaVent (see Section 4). "Firmware Update Available" will appear in the top right menu bar. Clicking the message will open a web page where you can download the firmware update. See Section 11 for firmware update instructions.
You can also check for updates using the Help menu.