Complete Table of Contents

1 Introduction

• 1.1 Levelogger Series
  • 1.1.1 Levelogger 5
  • 1.1.2 Barologger 5
  • 1.1.3 Levelogger 5 Junior
  • 1.1.4 Levelogger 5 LTC
  • 1.1.5 Rainlogger 5
  • 1.1.6 Levelogger Edge
  • 1.1.7 Barologger Edge
  • 1.1.8 Levelogger Junior Edge
  • 1.1.9 LTC Levelogger Edge
  • 1.1.10 Rainlogger Edge
• 1.2 Measurement Parameters
  • 1.2.1 Level
    • 1.2.1.1 Pressure Calibration
  • 1.2.2 Barometric Pressure
  • 1.2.3 Temperature
  • 1.2.4 Conductivity
    • 1.2.4.1 Calibration of the Conductivity Sensor
  • 1.2.5 Total Rainfall

2 Communicating with Solinst Dataloggers

• 2.1 Optical Readers
• 2.2 PC Interface Cable
• 2.3 Backwards Compatibility

3 System Requirements and Software Installation

• 3.1 System Requirements
• 3.2 Software Installation

4 Startup, Configurations and Settings

• 4.1 Startup
  • 4.1.1 Software/Firmware Update Checks
  • 4.1.2 Communicating with a USB Port
    • 4.1.2.1 HID-Compliant USB Devices
    • 4.1.2.2 Older Style USB Devices
• 4.2 Configuration and Settings
  • 4.2.1 Data Directory
  • 4.2.2 File Name Settings
  • 4.2.3 Default File Type

5 Levelogger Series Setup

• 5.1 Datalogger Settings
  • 5.1.1 Setting Up Channel Information
    • 5.1.1.1 Level Channel (Ch1)
    • 5.1.1.2 Temperature Channel (Ch2)
    • 5.1.1.3 Conductivity Channel (Ch3)
    • 5.1.1.4 Rainloggers
• 5.2 Datalogger Information
• 5.3 Datalogger Memory
• 5.4 Datalogger Time
• 5.5 Datalogger Sampling Mode
• 5.6 Datalogger Memory Mode
• 5.7 Saving and Retrieving Levelogger Settings Files
• 5.8 Starting and Stopping the Datalogger

6 Conductivity Calibration

• 6 Introduction to Conductivity Calibration
• 6 Conductivity Calibration
• 6 Setting Temperature Coefficient
• 6 Conductivity Calibration Setup
• 6 LTC Levelogger Junior Rinsing Process
  • 6.1 Restore Factory LTC Levelogger Calibration

7 Data Control

• 7.1 Downloading Options and Saving Data Files
  • 7.1.1 Default File Format
  • 7.1.2 Downloading Data
  • 7.1.3 Saving Data
• 7.2 Graph Manipulation and Zoom Function
• 7.3 File Export and Print Function

8 Data Compensation

• 8.1 Data Wizard
  • 8.1.1 Basic Compensation
  • 8.1.2 Advanced Compensation
• 8.2 Manual Barometric Compensation

9 Real Time View

10 Installation and Maintenance of Leveloggers

• 10.1 Installation
  • 10.1.1 Free Suspended Installations
    • 10.1.1.1 Suspension Wire/Rope Installation
    • 10.1.1.2 Direct Read Cable Assembly Installation
    • 10.1.1.3 Model 3001 Well Cap Assembly
  • 10.1.2 Fixed Installations
    • 10.1.2.1 Artesian Monitoring
    • 10.1.2.2 Vacuum Monitoring
  • 10.1.3 Barologger Installation
    • 10.1.3.1 Barometric Efficiency
  • 10.1.4 Rainlogger Installation
  • 10.1.5 Installation in Extreme Environments
    • 10.1.5.1 Freezing or High Temperature Conditions
    • 10.1.5.2 Marine or Brackish Installations
    • 10.1.5.3 Biofouling Conditions
• 10.2 Levelogger Maintenance

11 Diagnostics Utility

• 11.1 Run Diagnostics
• 11.2 Read Memory Dump
• 11.2.1 File Conversion (hex to xle)
• 11.3 Create Report
• 11.4 Email Report
• 11.5 LTC Calibration History Report
• 11.6 Software/Firmware Updates

12 Firmware Upgrade Utility

13 Troubleshooting

• 13.1 Problems During Installation of Levelogger Software
• 13.2 Error During Software Uninstall Process
• 13.3 Data Has Been Erased Accidentally
• 13.4 Error Messages During Use of Software
• 13.5 Levelogger Startup Issues After a Firmware Upgrade

Appendix

• Levelogger Gold
• Barologger Gold
• Levelogger Junior
• LTC Levelogger Junior
• Rainlogger