Programming Solinst LevelVent

solinst levelogger software datalogger settings window

Datalogger Settings Window

 

Note:

Clicking on the embedded in the software will provide you with a short explanation of that feature, e.g. Com Port, Slate Mode, Time Synchronization, etc.

 

Note:

Ensure the LevelVent logger is operating with the latest firmware, and that you are using the latest software. Visit www.solinst.com/downloads, or use the software update feature for assistance.

  1. Start the Levelogger Software.
  2. Select the appropriate Com Port for the connected device from the centre drop-down menu.
  3. Retrieve Levelogger Settings Click the 'Retrieve Settings' icon. This will retrieve and display the current programmed settings for the connected LevelVent.
  4. You can now customize the LevelVent including your Project ID, Location, Sampling Mode and Rate, and Future Stop and Start times.

Tip:

If a number of LevelVent dataloggers are to be programmed with identical inputs, clicking the 'Save Default Settings' icon will create a template.