1.1.1 Levelogger Edge

solinst levelogger edge levelogger edge technical specifications levelogger level logger edge water level dataloggers water level monitoring water temperature monitoring absolute pressure transducer levelogger edge technical specifications water level sensor temperature thermistor

The Levelogger Edge is an absolute (non-vented) datalogger, which measures groundwater and surface water levels and temperature. Water levels are displayed as temperature compensated pressure readings, and can be barometrically compensated with the aid of a Barologger Edge.

Note:

Solinst recommends using the most recent firmware, Version 3.003, when using a Levelogger Edge with Software Version 4.3.2.

 

Levelogger Edge Technical Specifications
Level Sensor: Piezoresistive Silicon with Hastelloy Sensor
Ranges: 15, 10, 20, 30, 100, 200 m
Accuracy: ± 0.05% FS
Normalization: Automatic Temp Compensation
Temp. Comp. Range: 0ºC to 50ºC
Temperature Sensor: Platinum Resistance Temperature Detector (RTD)
Temp. Sensor Accuracy: ± 0.05ºC
Temp. Sensor Resolution: 0.003ºC
Battery Life: 10 years (based on 1 reading/minute)
Clock Accuracy: ± 1 minute/year (-20ºC to 80ºC)
Operating Temperature: -20ºC to 80ºC
Maximum # Readings: 40,000 (up to 120,000 using data compression)
Memory: FRAM, Continuous or Slate mode
Communication Speed: 9600 bps, 38,400 bps with USB optical reader
Com Interface: Optical Infra-red: USB, RS-232, SDI-12
Size: 7/8" x 6.25" (22 mm x 159 mm)
Weight: 129 grams (4.5 oz.)
Corrosion Resistance: Titanium based PVD coated body and superior corrosion resistant Hastelloy sensor
Other Wetted Materials: Delrin®, Viton®, 316L Stainless Steel
Sampling Modes: Linear, Event & User-Selectable Schedule with Repeat Mode, Future Start, Future Stop, Real Time View
Measurement Rates: 0.125 second to 99 hours
Barometric Compensation: High accuracy, air-only, Barologger Edge

 

LT Edge Models Full Scale Accuracy
M5 5 m (16.4 ft.) ± 0.3 cm (0.010 ft.)
M10 10 m (32.8 ft.) ± 0.5 cm (0.016 ft.)
M20 20 m (65.6 ft.) ± 1 cm (0.032 ft.)
M30 30 m (98.4 ft.) ± 1.5 cm (0.064 ft.)
M100 100 m (328.1 ft.) ± 5 cm (0.164 ft.)
M200 200 m (656.2 ft.) ± 10 cm (0.328 ft.)

 

Note:

The Model number refers to the depth of submergence below water level that the pressure sensor can withstand. i.e.: The Levelogger Edge, which is available in M5, M10, M20, M30, M100, and M200 ranges has actual water level ranges of 5 m (16.40 ft), 10 m (32.80 ft), 20 m (65.60 ft), 30 m (98.40 ft), 100 m (328.0 ft), and 200 m (656.2 ft), respectively.