| Level Measurement Device | Description | Probe Diameter | Tape / Cable Lengths | |
|---|---|---|---|---|
| 101 P7 Water Level Meter |
 |
Manually measure depth to water using flat tape marked each mm or 1/100 ft. 101 P7 Meters use laser-marked flat tape. Measure total well depth with a P7 Probe (submersible the full length of hte tape). | 16 mm (5/8") | 30 - 600 m (100 - 2000 ft.) |
| 101 P2 Water Level Meter |
101 P2 Meters use heat-embossed polyethylene tape. The P2 Probe is simple to clean and repair. | 14 mm (0.55") | 30 - 300 m (100 - 1000 ft.) |
|
| 101D Water Level DrawDown Meter |  |
Manually measure depth to water and monitor drawdown using laser marked flat tape, laser-marked each mm or 1/100 ft. Probe is pressure-proof the full length of the submerged tape. | 16 mm (5/8") | 30 - 600 m (100 - 2000 ft.) |
| 101B Water Level Meter |
 |
Manually measure depth to water using heat-embossed polyethylene flat tape, marked every centimeter. The P1 Probe is leak-proof. | 12.7 mm (1/2") | 30 m, 60 m, 100 m |
| 102 Water Level Meter |
 |
Manually measure depth to water using narrow cable, laser-marked each mm or 1/100 ft. | P4: 4 mm (0.157") P10:10 mm (3/8") | 30 -300 m (100 - 1000 ft.) |
| 102M Mini Water Level Meter |
P4: 4 mm (0.157") P10:10 mm (3/8") | 25 m (80 ft.) |
||
| 104 Sonic Water Level Meter |  |
Uses sound waves to detect the depth to static water level without lowering the probe down the well. | 16 mm (5/8") | 600 m (2000 ft) Detection Range |
| 105 Well Casing & Depth Indicator |  |
Detect where metal well casing starts and ends, and measure the total depth of a well or borehole. Measurements are taken using flat tape laser-marked each mm or 1/100 ft. | 22 mm (7/8") | 30 - 600 m (100 - 2000 ft.) |
| 201 Water Level Temperature Meter |  |
Manually measure water level and temperature. Water Level measurements are taken from flat tape lasermarked each mm or 1/100 ft. | 16 mm (5/8") | 30 - 600 m (100 - 2000 ft.) |
| 107 TLC Meter |  |
Manually measure water level, temperature, and conductivity. Water Level measurements are taken from flat tape lasermarked each mm or 1/100 ft. | 19 mm (3/4") | 30 - 300 m (100 - 1000 ft.) |
| 122 Interface Meter |  |
Manually measure water levels and detect oil/water interfaces. Allows measurement of DNAPL or LNAPL layers. Using the standard 122, levels are taken from flat tape laser-marked each mm or 1/100 ft. Using the 122M, levels are taken from cable laser-marked each mm or 1/100 ft. Intrinsically Safe and ATEX Certified. | 16 mm (5/8") | 15 - 300 m (50 - 1000 ft.) |
| 122M Mini Interface Meter | 16 mm (5/8") | Cable: 25 m (80 ft.) |
||
| 103 Tag Line |  |
Manually measure well depths using durable cable, laser-marked every 5 cm or 1/10 ft., or flat tape lasermarked every mm or 1/100 ft. (Also a marked support line for samplers, packers, and dataloggers) |
19 mm (3/4") or 13 mm (1/2") | 30 - 300 m (100 - 1000 ft.) |
