4.8.2 STS Modem Port Settings

In the Modem Port Settings tab, select the Communication Mode you are using to connect to your modem from the drop-down menu. The options are:

Figure 4-21 Modem Port Setup

 

Ensure that you have configured your modem with the same communications and port setup you enter when programming the modem, including the Baud Rate, Data Bits, Parity, Stop Bits, Home Station static IP Address, and TCP Port Number. See Section 3.4. Update the modem port settings to match, if required.

Note:

When using the RS-232 Communication Mode, the Baud Rate must be 115200. When using the RRL Bridging Communication Mode, the Baud Rate must be 9600.