Manta F35 Anti-fouling Multiparameter Probes

Manta F35 Anti-Fouling Water Quality Sondes

Solinst Eureka has fitted its highly successful Manta+35 Water-Quality Multiparameter probe with a copper-filled, silicone “nose cone” that covers all of the exposed sensors except the critical measurement surfaces.A central wiper keeps those measurement surfaces clean, meaning that you get better data and minimal clean-up.

Water-Quality Monitors

Solinst Eureka’s Manta Multiparameter Water-Quality Multiprobes have been workhorses in the field for over 15 years. Their reliability, data integrity, and lifetime cost are the best in the professional class of multiprobes. But even with innovations like the central wiper and consumable copper-gauze kits, they could not completely conquer a multiprobe’s worst enemy: sensor fouling.

Until now. Gone are the days of measurement surfaces affected by foulants, and endlessly scraping algae, silt, and barnacles from the sensors. The problem is the algae, fungi, bacterial slimes, barnacles, silts, etc. encountered by your multiprobe during logging runs. Not only do they degrade data and increase maintenance, but they can ruin sensors. The solution requires sensors whose measurement surfaces are in the same plane, a wiper with the appropriate brush material, and an easily removed, disposable “nose cone” that covers the exposed sensor surfaces and uses copper to keep biota from attaching to the sensors.

The Manta F35’s unique silicone “nose cone” fits snugly over the sensors to protect the sensor bodies and the active sensor surfaces. The nose cone is easily removed should it become damaged, or when you are doing sensor maintenance (such as changing an ISE tip).

A copper-less nose cone is available, as is a silver-impregnated model. And note that the nose cone has the additional benefit of reducing the volume of solutions needed for proper calibration. The nose cone works in fresh and salt waters, for biological and non-biological foulants.

 

solinst eureka manta f35 anti fouling multiprobe

Solinst Eureka Manta F35 Water Quality Sondes

Solinst Eureka Manta F35
Anti-fouling Water Quality Sonde Specifications

Specification
Manta F35
Data Memory
Greater than 1,000,000 logged readings
Sample Rate
1 Hz
Communications
RS-232, SDI-12, USB or Bluetooth
Depth Rating
200 m, Max depth for ISE and TDG sensors is 15 meters
Operating Temperature
-5 to 50 C
Battery Pack
6 x C Size Batteries
Number of sensors
Up to 11
Weight - with IBP
9.0 lbs
Without Battery
5 lbs
Add Internal Battery Pack
19 inches
Length - w/o Battery Pack
19 inches
Diameter
3.5 inches
solinst eureka manta f35 anti foul multiparameter sonde configuration b

Solinst Eureka F35 Anti-Fouling
Water Quality Sonde Configuration

 

Standard Sensors

1. DO Dissolved Oxygen

2. Wiper

3. Conductivity

4. Turbidity

5. pH / ORP (Oxidation Reduction Potential)

6. Depth

7. pH Reference

8. Temperature

 

Medium Sensor Options

9. Medium Sensor

10.Medium Sensor

11.Medium Sensor

Standard models are shown. Please call for a quote for custom configurations.

  • Any fluorometer may be substituted for turbidity.
  • pH, pH reference, conductivity and DO are “small” sensors.
  • For a probe with turbidity sensor, the turbidity wiper extension brush wipes the fluorometer and DO sensor.
  • For Manta F35 Models with no turbidity, a wiper system is available to wipe DO and fluorometer sensors.
  • Any sensor may be removed and the port plugged.
  • ORP is combined with pH and is optional on all models
  • Depth sensor is optional on all models

Note:  

  • Depth and ORP (must have pH) optional on any probe

Related Products

solinst eureka multi parameter water probes

Manta Series Water Quality Probes

Solinst Eureka offers the largest selection of water quality sensor technologies in the industry. So in addition to standard configurations, each probe may be customized for your specific application. Pick sensors of your choice to fully populate larger probes, or add a battery pack to convert a probe to a logging device.

solinst eureka trimeter water quality sondes

Manta Trimeter Water Quality Probe

The Trimeter holds any one sensor* from the Sensor Parameters list, Plus temperature and depth sensors (both are optional). For example, a Trimeter configuration could be turbidity, temperature, and depth. Another example could be DO and temperature.

solinst eureka easyprobe water quality sondes

EasyProbe: Water Quality Sondes

The EasyProbe, by Solinst Eureka, is a high-performance, cost-effective water quality monitor. It's ideal for spot-checking, remote telemetry, education, research, aquaculture, and more. The EasyProbe20 includes sensors for temperature, dissolved oxygen, conductivity, and pH, while the EasyProbe30 adds a turbidity sensor. Eureka multiprobes are known for their reliability, with a three-year warranty covering all sensors, and have the lowest maintenance costs in the industry.

solinst levelogger 5 ltc water level water temperature and water conductivity datalogger

Water Level, Temperature & Conductivity Datalogging

The Levelogger 5 LTC measures and logs water level fluctuations, temperature and conductivity. It is programmed to record at intervals as often as 2 seconds. It includes an 8-year battery, memory for 100,000 sets of readings, and comes in 6 pressure ranges. A PFAS-free coating (inside and out) provides superior corrosion and abrasion resistance.

solinst model 107 tlc meter for temperature and conductivity profiling

TLC Meter – Measure Accurate Temperature, Level & Conductivity

A TLC Meter provides accurate, stable temperature and conductivity measurements, displayed on a convenient LCD display for easy reading. Static water level and depth of readings are read off Solinst flat tape, which is precisely laser-marked every mm or 1/100 ft. Tape lengths are available to 300 m (1000 ft).