RRL 5 Remote Radio Link Telemetry System Datasheet
RRL 5 Remote Radio Link
Model 9200
The Solinst RRL 5 Remote Radio Link Telemetry System offers a very simple, compact and inexpensive method of local telemetry. Data is sent from Solinst dataloggers in the field via short-distance radio to your Home Station PC. The RRL 5 is excellent for small, closed-loop networks such as mine sites, golf courses, and landfill monitoring networks. By using free unlicensed radio bands (ISM), the RRL 5 has the advantage of being lower cost than cellular telemetry systems.
Advantages of RRL 5 Remote Radio Link Telemetry
- No-cost radio transmission
- Compact all-in-one units for discreet installation
- Report barometrically compensated water level
data - Use database to import to your own website or list
- Remotely monitor battery level and status with
each report - Less need to travel to remote/ hazardous locations
- Ideal for small, closed-loop networks
RRL 5 Telemetry Stations
RRL 5 Stations can fit inside a 2″ monitoring well for discreet placement. They work with omnidirectional antenna, RF lineof-sight transmission, therefore, they can communicate over distances up to 30 km (20 miles).
RRL 5 Stations have the option of 900 MHz or 2.4 GHz radio modules. They use six replaceable lithium batteries. Up to two Solinst dataloggers can be connected to one RRL 5 (using a Splitter). A built-in barometer provides the option of reporting barometrically compensated Levelogger readings.
The USB-C connection on each RRL 5 is used for diagnostic, firmware updates and programming purposes. It can also be used to connect an external power source.
All RRL 5 Stations use the same hardware, and are programmed using a wizard in Solinst Telemetry Software as a Home Station or Remote Station. RRL 5 Stations are interchangeable as required.
RRL 5 Stations have a non-volatile internal memory to store collected data until the Home Station is successfully contacted.
RRL 5 Telemetry Operation
Systems operate on two basic schedules. A sample rate is set, at which an RRL 5 records a real-time reading from each attached datalogger. A report rate is the frequency that the data is sent from an RRL 5 to the Home Station PC. Optionally, dataloggers can be set up to record and store data independently of the RRL.
Reported data is saved in a dynamically updated database on the Home Station PC, and can also be viewed and exported using Solinst Telemetry Software. You have complete control of your data.
Features of RRL 5 Telemetry
- Sized to fit inside a standard 2″ well casing
- Internal barometer for automatic water level compensation
- Connection for up to two dataloggers on each device
- Database is automatically updated with each new data report
- Free Solinst Telemetry Software for easy setup, remote updates and data management
- Remote Utility for simple diagnostics
RRL 5 Remote Radio Link Setup in Well
- Antenna
- Well Cap
- RRL 5
- Internal Barometer
- Splitter
- Reader Cable
- Direct Read Cable
- Barologger 5
- Levelogger 5
RRL 5 Remote Radio Link Specifications
Related Products
Plug and Play Telemetry
Already own Leveloggers? Quickly and easily upgrade your monitoring wells with LevelSender Telemetry. The 4G LevelSender 5 telemetry system features an optional Solinst SIM card. It is set up for you in advance—with a low-cost plan managed by Solinst! An internal barometer provides automatically compensated water level readings; set high/low level alarms.
Discover Anywhere Monitoring
SolSat 5 is a telemetry system that leverages Iridium satellite technology to provide global connectivity for Solinst 5 Series dataloggers. It uses low cost TextAnywhere global satellite messaging to send remote data to a secure web portal. It features a robust weatherproof enclosure for installation almost anywhere. Features built-in Wi-Fi setup app, solar panel, and barometer.
Solinst Readout Unit (SRU)
The Solinst Readout Unit (SRU) is a rugged, handheld device designed to connect to a deployed Solinst datalogger and display instant water level readings – with the option of automatic barometric compensation. Real-time logging and downloaded data can be saved and transferred to a PC. Quickly check the datalogger's status.
Versatile Submersible Water Level Transmitter
The 301 Water Level Temperature Sensor provides the option of highly accurate water level transmission using multiple protocols – MODBUS, SDI-12 and 4-20mA – for a wide variety of applications. This compact, all-in-one submersible hydrostatic level transmitter provides continuous, stable water level and temperature readings, with options for absolute and gauged pressure sensors.
