CMT Specifications & Considerations

Note:  

* Tubing is MDPE; proprietary mix of HDPE and LDPE products.
** Avoid using ‘single lifts’ of grout, greater than 50 ft in the unsaturated zone.
*** Each CMT coil measures 1 to 2 ft longer than stated.
**** If air temperature is above +35ºC, use cold water to cool down the tubing at the port before installing the port plug.

Note:  

Port plugs are tightened to a torque of 12.5 inch-pounds. Plugs in the base, or bottom, of the CMT should be torqued sequentially and incrementally to ensure even expansion.

Note:  

Gear clamp is tightened to a torque of 12.5 inch-pounds, so guide point can support up to 20 lbs of additional weight (optional).

Note: